ATM-IN-13 (A36) 是一种具有口服活性的选择性 ATM 激酶抑制剂,对人源 IC50 为 0.3 nM,可阻断 ATM 介导的 DNA 双链断裂修复信号通路,降低 ATM 和 p53 的磷酸化水平,抑制 ATM 依赖性 DNA 损伤应答,并可用于结直肠癌的研究。
产品编号: MS-A51741 CAS No.: 3104731-13-4 分子式: C27H33N5O 分子量: 443.58
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

ATM-IN-13 (A36) 是一种具有口服活性的选择性 ATM 激酶抑制剂,对人源 IC50 为 0.3 nM,可阻断 ATM 介导的 DNA 双链断裂修复信号通路,降低 ATM 和 p53 的磷酸化水平,抑制 ATM 依赖性 DNA 损伤应答,并可用于结直肠癌的研究。

生物实验数据

生物活性 ATM-IN-13 (A36) is an orally active selective ATM kinase inhibitor with a human IC50 of 0.3 nM that blocks the ATM-mediated DNA double-strand break repair signaling pathway, reduces the phosphorylation levels of ATM and p53, inhibits the ATM-dependent DNA damage response, and can be used for colorectal cancer research.
体外研究
(In Vitro)

ATM-IN-13 (A36) 可强效抑制纯化的 ATM 激酶,其 IC50 为 0.3 nM。
ATM-IN-13 (A36) 具有高激酶选择性,相对于其 0.3 nM 的 ATM IC50,对 ATR、mTOR 和 PI3Kα 的选择性超过 3333 倍,对 DNA-PK 的选择性为 493 倍。
ATM-IN-13 (A36) 可抑制经 2 Gy 照射的 HCT116 结直肠癌细胞的增殖,其 IC50 为 1.7 nM。
ATM-IN-13 (A36) (20-40 nM; 6 days) 可强效提升伊立替康在 HCT116 和 SW620 结直肠癌细胞中的细胞毒性,且在 SW620 细胞中具有更强的协同作用。
ATM-IN-13 (A36) (10-20 nM) 可增强伊立替康抑制结直肠癌细胞集落形成的能力。
ATM-IN-13 (A36) (2 μM) 可抑制伊立替康激活的 ATM 信号通路在 HCT116 结直肠癌细胞中的作用,降低 γ-H2AX、磷酸化 ATM 及磷酸化 p53 的水平。
ATM-IN-13 (A36) (0.5-2 μM) 可浓度依赖性地降低伊立替康诱导的 HCT116 结直肠癌细胞中 γ-H2AX 水平,证实其对 ATM 介导的 DNA 损伤信号通路具有抑制作用。
ATM-IN-13 (A36) (0.008-1 μM; 48 h) 单独作用不会改变 HCT116 或 SW620 结直肠癌细胞的细胞周期分布,但会以浓度依赖的方式增强伊立替康诱导的 G2/M 期阻滞。
ATM-IN-13 (A36) (0.25-0.5 μM; 48 h) 单独作用不会诱导 HCT116 结直肠癌细胞发生凋亡,但会以浓度依赖的方式增强伊立替康诱导的凋亡。
ATM-IN-13 (A36) 在人源和大鼠肝微粒体、小鼠/大鼠血浆中具有良好的代谢稳定性,在小鼠肝微粒体中稳定性较差,且在 25°C (pH 7) 时的水溶性极佳,达 1258.1 μg/mL。
ATM-IN-13 (A36) 具有较低的药物-药物相互作用潜力,对 CYP1A2、CYP2C9、CYP2C19、CYP2D6 和 CYP3A4 的抑制作用 IC50 > 30 μM。

Cell Viability Assay

Cell Line: HCT116 and SW620 colorectal cancer cells
Concentration: 20 nM, 40 nM (combination with irinotecan)
Incubation Time: 6 days
Result: Reduced the irinotecan IC50 by 10.2-fold and 12.2-fold in HCT116 cells when used at 20 nM and 40 nM in combination with irinotecan, respectively.
Reduced the irinotecan IC50 by 84.3-fold and 253-fold in SW620 cells when used at 20 nM and 40 nM in combination with irinotecan, respectively.

Cell Cycle Analysis

Cell Line: HCT116 and SW620 colorectal cancer cells
Concentration: 1 μM (HCT116, monotherapy); 0.25 μM, 0.5 μM, 1 μM (HCT116, combination with 1 μM irinotecan); 0.2 μM (SW620, monotherapy); 0.008 μM, 0.04 μM, 0.2 μM (SW620, combination with 0.1 μM irinotecan)
Incubation Time: 48 h
Result: Had no effect on cell cycle distribution in HCT116 cells when used alone at 1 μM.
Increased the percentage of HCT116 cells in G2/M phase to 66.09%, 68.8%, and 78.01% when used at 0.25 μM, 0.5 μM, and 1 μM in combination with 1 μM irinotecan, respectively.
Had no effect on cell cycle distribution in SW620 cells when used alone at 0.2 μM.
Increased the percentage of SW620 cells in G2/M phase to 57.92%, 58.56%, and 60.26% when used at 0.008 μM, 0.04 μM, and 0.2 μM in combination with 0.1 μM irinotecan, respectively.
体内研究
(In Vivo)

ATM-IN-13 (A36) (20-40 mg/kg;灌胃;每日一次;连续 12 天) 与脂质体伊立替康联合使用时,在 HCT116 结直肠癌异种移植模型中分别实现了 82.3%和 92.6%的肿瘤生长抑制率,且安全性良好。
ATM-IN-13 (10-20 mg/kg;灌胃;每日一次;连续 16 天) 与脂质体伊立替康联合使用时,在 SW620 结直肠癌异种移植模型中分别实现 80.8%和 91.1%的肿瘤生长抑制率,且安全性良好。

Animal Model: Immunodeficient nude mice (implanted with HCT116 human colorectal cancer cells)
Dosage: 20 mg/kg (combination TGI); 40 mg/kg (monotherapy TGI, combination TGI); 2 mg/kg (liposomal irinotecan)
Administration: p.o.; daily; 12 days
Result: Achieved a tumor growth inhibition (TGI) rate of 41.7% (monotherapy, 40 mg/kg).
Achieved TGI rates of 82.3% (20 mg/kg + liposomal irinotecan) and 92.6% (40 mg/kg + liposomal irinotecan).
Showed statistically significant enhanced efficacy in the 40 mg/kg combination group compared to single-agent groups.
Caused no treatment-related fatalities and only moderate body weight loss in the high-dose group.
Animal Model: Immunodeficient nude mice (implanted with SW620 human colorectal cancer cells)
Dosage: 10 mg/kg (combination TGI); 20 mg/kg (monotherapy TGI, combination TGI); 2 mg/kg (liposomal irinotecan)
Administration: p.o.; daily; 16 days
Result: Achieved a tumor growth inhibition (TGI) rate of 28.4% (monotherapy, 20 mg/kg) without causing body weight loss.
Achieved TGI rates of 80.8% (10 mg/kg + liposomal irinotecan) and 91.1% (20 mg/kg + liposomal irinotecan).
Showed statistically significant enhanced efficacy in combination groups compared to liposomal irinotecan monotherapy.
Caused no treatment-related fatalities across all dosing regimens.

化学信息

分子量 443.58
分子式 C27H33N5O
CAS No. 3104731-13-4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础