Landiolol hydrochloride

Synonyms: 盐酸兰地洛尔; ONO1101 hydrochloride
Landiolol (ONO1101) hydrochloride 是一种高选择性、超短效的 β1 肾上腺素受体竞争性抑制剂,可特异性阻断心脏 β1 受体,从而降低心率和心肌耗氧量,并在脓毒症模型中抑制 TNF-α 诱导的线粒体过度氧消耗和活性氧 (ROS) 生成,减轻肾损伤,同时对心脏离子通道(如 L 型钙电流、内向整流钾电流)影响甚微,负性肌力作用较弱,可用于围手术期心动过速控制及脓毒症相关急性肾损伤的保护研究。
产品编号: MS-A32780 纯度: 99.82% CAS No.: 144481-98-1 分子式: C25H40ClN3O8 分子量: 546.05
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
3-5 天
500mg
询价
询价
1g
询价
询价

产品描述

Landiolol (ONO1101) hydrochloride 是一种高选择性、超短效的 β1 肾上腺素受体竞争性抑制剂,可特异性阻断心脏 β1 受体,从而降低心率和心肌耗氧量,并在脓毒症模型中抑制 TNF-α 诱导的线粒体过度氧消耗和活性氧 (ROS) 生成,减轻肾损伤,同时对心脏离子通道(如 L 型钙电流、内向整流钾电流)影响甚微,负性肌力作用较弱,可用于围手术期心动过速控制及脓毒症相关急性肾损伤的保护研究。

生物实验数据

生物活性 Landiolol (ONO1101) hydrochloride is a highly selective, ultra-short-acting competitive β1-adrenergic receptor inhibitor that specifically blocks cardiac β1 receptors to reduce heart rate and myocardial oxygen consumption, suppresses TNF-α-induced mitochondrial hyperoxygen consumption and reactive oxygen species (ROS) production to alleviate renal injury in sepsis models, exerts minimal effects on cardiac ion channels (such as L-type calcium current and inward rectifier potassium current) with weak negative inotropic action, and can be used for perioperative tachycardia control and protective studies of sepsis-associated acute kidney injury.
IC50 & Target

Beta-1 adrenergic receptor

 

L-type calcium channel

 

IrK

 

体外研究
(In Vitro)

Landiolol hydrochloride (10 μM;24 h) 显著抑制 HEK293 细胞中 TNF-α (0.5 nM) 诱导的线粒体氧消耗率 (OCR) 升高,使基础 OCR 从 123% 降至 94.8%,并减少活性氧 (ROS) 生成。
Landiolol hydrochloride (10 μM;24 h) 抑制 TNF-α (0.5 nM) 诱导的 HEK293 细胞的过度糖酵解能力,但不显著影响其基础糖酵解 (ECAR) 水平。

Cell Viability Assay

Cell Line: HEK293 cells
Concentration: 10 μM (Landiolol)
Incubation Time: 24 h; with 0.5 nM TNF-α
Result: Resulted in a significant reduction in basal OCR compared to TNF-α alone. The OCR, normalized to control (100%), decreased from 123.9%±16.6% (TNF-α only) to 94.8%±13.3% (TNF-α + Landiolol).
Attenuated maximal OCR and ATP production, indicating inhibition of mitochondrial hyperactivity.
Significantly lowered intracellular ROS levels, measured via dichlorodihydrofluorescein (DCF) assay.
体内研究
(In Vivo)

Landiolol (0.1 mg/kg/min;静脉输注;单剂量;6 h) hydrochloride 显著降低脂多糖 (LPS) 诱导大鼠急性肾损伤模型的血清肌酐和乳酸浓度,减轻肾小管坏死和炎症损伤。Landiolol hydrochloride 可能不通过全身抗炎或抗氧化作用介导肾脏保护作用。
Landiolol hydrochloride 对心脏功能的影响小于 Esmolol (MS-B86299),不会直接缩短动作电位时程 (APD)。

Animal Model: LPS-induced Acute Kidney Injury Rat Model (250-300 g,6-8 weeks old)
Dosage: 0.1 mg/kg/min
Administration: Continuous intravenous infusion starting at the time of LPS administration (7.5 mg/kg, iv), maintained for 6 h
Result: Significantly improved renal function compared to the LPS group.
Decreased serum creatinine levels to 0.7 ± 0.3 mg/mL versus 1.4 ± 0.7 mg/mL in the LPS group, and decreased lactate levels to 3.8 ± 0.7 mmol/L versus 6.5 ± 1.3 mmol/L, at 6 h.
Reduced tubular degeneration, dilation, and acute necrosis in the renal cortex and medulla in the landiolol group compared to the LPS group.
Urinary 8-OHdG, a marker of oxidative stress, was increased in both groups but not significantly different between them, indicating landiolol’s renoprotection was not mediated by systemic anti-inflammatory or antioxidant effects.
性状 固体
颜色 White to off-white

化学信息

分子量 546.05
分子式 C25H40ClN3O8
CAS No. 144481-98-1
别名 盐酸兰地洛尔; ONO1101 hydrochloride

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (3.66 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 250 mg/mL (457.83 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : ≥ 100 mg/mL (183.13 mM)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM1.8313 mL9.1567 mL18.3133 mL45.7834 mL
5 mM0.3663 mL1.8313 mL3.6627 mL9.1567 mL
10 mM0.1831 mL0.9157 mL1.8313 mL4.5783 mL
15 mM0.1221 mL0.6104 mL1.2209 mL3.0522 mL
20 mM0.0916 mL0.4578 mL0.9157 mL2.2892 mL
25 mM0.0733 mL0.3663 mL0.7325 mL1.8313 mL
30 mM0.0610 mL0.3052 mL0.6104 mL1.5261 mL
40 mM0.0458 mL0.2289 mL0.4578 mL1.1446 mL
50 mM0.0366 mL0.1831 mL0.3663 mL0.9157 mL
60 mM0.0305 mL0.1526 mL0.3052 mL0.7631 mL
80 mM0.0229 mL0.1145 mL0.2289 mL0.5723 mL
100 mM0.0183 mL0.0916 mL0.1831 mL0.4578 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础