SAR247799

Synonyms: S1P1 agonist 3
SAR247799(S1P1 agonist 3)是一种具有口服活性、选择性且偏向G蛋白的鞘氨醇-1-磷酸受体-1(S1P1)激动剂,在S1P1过表达细胞和HUVEC中的EC50为12.6-493 nM,可用于内皮保护的研究,包括2型糖尿病和代谢综合征。
产品编号: MS-A24778 纯度: 99.38% CAS No.: 1315311-14-8 分子式: C21H16ClN3O5 分子量: 425.82
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

SAR247799(S1P1 agonist 3)是一种具有口服活性、选择性且偏向G蛋白的鞘氨醇-1-磷酸受体-1(S1P1)激动剂,在S1P1过表达细胞和HUVEC中的EC50为12.6-493 nM,可用于内皮保护的研究,包括2型糖尿病和代谢综合征。

生物实验数据

生物活性 SAR247799 (S1P1 agonist 3) is an orally active, selective and G protein-biased sphingosine-1-phosphate receptor-1 (S1P1) agonist with EC50 values of 12.6-493 nM in S1P1-overexpressing cells and HUVECs, and can be used for research on endothelial protection, including type 2 diabetes and metabolic syndrome.
IC50 & Target β-arrestin recruitment (S1P1, HEK293 cells):15 nM (EC50), Gi-mediated cAMP (S1P1, HEK293 cells):1.4 nM (EC50)
体外研究
(In Vitro)

SAR247799 (0, 0.003, 0.01, 0.03, 0.1, 0.3, 1, 3, 10 μM; 10 min) induces a concentration-dependent phosphorylation of extracellular-regulated kinase-1/2 (Erk1/2) and protein kinase B (Akt) in HUVECs.
SAR247799 (0-10 μM, 8 min) induces impedance change in HUVECs in a dose-dependent manner.
SAR247799 (1 μM, 1st) does not cause desensitization demonstrated by Ca2+ flux assay in S1P1-Chinese hamster ovary (CHO) cells.

体内研究
(In Vivo)

SAR247799 (1 and 3 mg/kg; p.o.; 1 h before renal occlusion) dose dependently reduces the severity of ischemia/reperfusion (I/R)–induced acute kidney injury.
SAR247799 (0.3, 1, 3 mg/kg; i.v.) dose dependently increases the coronary conductance ratio in pig model of coronary endothelial dysfunction.
SAR247799 (30-min intravenous administration; 8- to 10-week-old farm pig) exposure (Cmax and AUC) increases with dose in pigs. Pharmacokinetic parameters:

Dose (mg/kg) N Cmax (g/mL) Tmax (h) Tlast (h) AUC0-last (g.h/mL) Cl (L/h/kg) Vss (L/kg) T1/2z (h)
1 4 2.08 (8) 0.5 [0.5] 11.8 (46) 0.113 (75) 0.516 (11) 5.62 (57)
3 7 8.10 (12) 0.5 [0.5] 42.2 (23) 0.0754 (30) 0.446 (16) 6.21 (28)
10 3 36.7 (5) 0.5 [0.5-0.75] 72 294 (13) 0.0343 (13) 0.338 (7) 7.73 (8)
30 6 112 (27) 0.5 [0.5- 1.0] 908 (16) 0.0338 (18) 0.294 (11) 7.35 (11)
Mean values with (CV%) except Tmax, which is expressed as median value with [range] and Tlast as [range]. Cmax, maximum concentration. Tmax, time at which maximum concentration achieved. Tlast, last time point sampled. AUC0-last, area under curve from 0 to last time point. Cl, clearance. Vss, volume at steady state or volume of distribution. T1/2z, elimination half-life. N, number of animals.

Animal Model: Acute kidney injury rats (12 to 15-week-old Fischer rats)
Dosage: 1 and 3 mg/kg
Administration: P.o.; administered 1 hour before renal occlusion.
Result: Inhibited the increase in serum creatinine (89 and 96% at 1 and 3 mg/kg) and urea (61 and 85% at 1 and 3 mg/kg).
Protected renal proximal tubules against necrosis and blunted the development of interstitial hemorrhage.
Animal Model: Acute kidney injury rats (8- to 12-week-old Fischer rats)
Dosage: 3 mg/kg
Administration: P.o.; twice a day for 7 days and twice a day for 7 day
Result: Showed a dosedependent trend for reducing macrophage.
性状 固体
颜色 Off-white to light yellow

化学信息

分子量 425.82
分子式 C21H16ClN3O5
CAS No. 1315311-14-8
别名 S1P1 agonist 3

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween-80+45% Saline: 2 mg/mL (4.7 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 33.33 mg/mL (78.27 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.3484 mL11.7421 mL23.4841 mL58.7103 mL
5 mM0.4697 mL2.3484 mL4.6968 mL11.7421 mL
10 mM0.2348 mL1.1742 mL2.3484 mL5.8710 mL
15 mM0.1566 mL0.7828 mL1.5656 mL3.9140 mL
20 mM0.1174 mL0.5871 mL1.1742 mL2.9355 mL
25 mM0.0939 mL0.4697 mL0.9394 mL2.3484 mL
30 mM0.0783 mL0.3914 mL0.7828 mL1.9570 mL
40 mM0.0587 mL0.2936 mL0.5871 mL1.4678 mL
50 mM0.0470 mL0.2348 mL0.4697 mL1.1742 mL
60 mM0.0391 mL0.1957 mL0.3914 mL0.9785 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础