NCO-141 是一种选择性 SIRT2 抑制剂(IC50 为 0.5 μM),通过 caspase 激活和线粒体超氧阴离子生成诱导细胞凋亡 (apoptosis),并通过提升 LC3-II 水平和自噬体积累诱导细胞自噬 (autophagy),可用于白血病的相关研究。
产品编号: MS-A13310 CAS No.: 1382354-26-8 分子式: C21H19FN2O2 分子量: 350.39
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

NCO-141 是一种选择性 SIRT2 抑制剂(IC50 为 0.5 μM),通过 caspase 激活和线粒体超氧阴离子生成诱导细胞凋亡 (apoptosis),并通过提升 LC3-II 水平和自噬体积累诱导细胞自噬 (autophagy),可用于白血病的相关研究。

生物实验数据

生物活性 NCO-141 is a selective SIRT2 inhibitor with an IC50 of 0.5 μM that induces apoptosis through caspase activation and mitochondrial superoxide anion production, and induces autophagy by elevating LC3-II levels and promoting autophagosome accumulation, making it applicable for research related to leukemia.
IC50 & Target

SIRT2

0.5 μM (IC50)

体外研究
(In Vitro)

NCO-141 (0.1-100 μM; 72 h) 以剂量依赖方式抑制 S1T、MT-2、Jurkat 和 HL60 白血病细胞系的生长,其 GI50 值分别为 34.9 μM、26.4 μM、36.7 μM 和 12.1 μM。
NCO-141 (0.1-100 μM; 72 h) 可在 S1T、MT-2、Jurkat 和 HL60 白血病细胞系中诱导剂量依赖性细胞凋亡。
NCO-141 (10-50 μM; 6 h) 可在 S1T、MT-2、Jurkat 和 HL60 白血病细胞系中诱导线粒体超氧阴离子生成。
NCO-141 (50-100 μM; 72 h) 可激活 S1T、MT-2、Jurkat 和 HL60 白血病细胞系中的 caspase-3、-8 和 -9,但会诱导不依赖 caspase 的细胞死亡,因为泛 caspase 抑制剂无法阻止细胞死亡或抑制 caspase 相关标志物的产生。
NCO-141 (72 h) 可提高乙酰化组蛋白 H4 水平,并促进 S1T、MT-2、Jurkat 和 HL60 白血病细胞系中核 p53 的降解。
NCO-141 (25-100 μM; 24-48 h) 可通过上调 LC3-II 水平、促进自噬体积累及抑制自噬体降解,在 S1T、MT-2、Jurkat 和 HL60 白血病细胞系中诱导自噬。

Cell Viability Assay

Cell Line: HTLV-1-infected CD4+ T-cell line S1T, HTLV-1-infected T-cell line MT-2, T-lineage acute lymphoblastic leukemia cell line Jurkat, acute myeloid leukemia cell line HL60
Concentration: 0.1, 1, 10 and 100 μM
Incubation Time: 72 h
Result: Inhibited the growth of all four leukemic cell lines in a dose-dependent manner.
Achieved GI50 values of 34.9 μM for S1T cells, 26.4 μM for MT-2 cells, 36.7 μM for Jurkat cells, and 12.1 μM for HL60 cells.

Apoptosis Analysis

Cell Line: S1T, MT-2, Jurkat, HL60 cell lines
Concentration: 0.1, 1, 5, 10, 25, 50 and 100 μM
Incubation Time: 72 h
Result: Induced dose-dependent increases in annexin V-positive cells across all four cell lines.
At 100 μM, reached percentages of specific annexin V-positive cells of 85.3% for S1T cells, 39.0% for MT-2 cells, 85.9% for Jurkat cells, and 86.7% for HL60 cells.
Induced early-phase apoptosis (annexin V+/7-amino-actinomycin D- cells) and DNA fragmentation via TUNEL assay.

Cell Autophagy Assay

Cell Line: S1T, MT-2, Jurkat, HL60 cell lines
Concentration: 25, 50 and 100 μM (48 h incubation); 50 μM (24 h incubation)
Incubation Time: 24 h (autophagic flux analysis); 48 h (Cyto-ID analysis, western blot)
Result: Increased autophagy levels (detected via increased Cyto-ID fluorescence) in all four cell lines.
Significantly increased LC3-II (autophagic vesicle-associated) levels compared to untreated controls.
Induced LC3 translocation, and analysis of autophagic flux showed NCO-141 both promotes autophagosome formation and inhibits autophagosome degradation.

化学信息

分子量 350.39
分子式 C21H19FN2O2
CAS No. 1382354-26-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础