LL-K12-18 是一种 CDK12 激酶抑制剂,也是一种双位点分子胶,它以 283.9 nM 的 IC50 值抑制人源 CDK12,并通过稳定 CDK12-DDB1 复合物经泛素-蛋白酶体系统选择性降解 cyclin K,同时下调 DNA 损伤应答基因、降低 RNA 聚合酶 II CTD Ser2 磷酸化水平并调节 ATM、RAD51、γ-H2AX 和剪切型 PARP 等标志物,从而有效诱导乳腺癌细胞凋亡 (apoptosis) 并抑制其增殖,且具有高度的靶向选择性,可用于三阴性乳腺癌的研究。
产品编号: MS-A05294 纯度: 98.42% CAS No.: 3081311-94-3 分子式: C25H32Cl2N10O 分子量: 559.49
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

LL-K12-18 是一种 CDK12 激酶抑制剂,也是一种双位点分子胶,它以 283.9 nM 的 IC50 值抑制人源 CDK12,并通过稳定 CDK12-DDB1 复合物经泛素-蛋白酶体系统选择性降解 cyclin K,同时下调 DNA 损伤应答基因、降低 RNA 聚合酶 II CTD Ser2 磷酸化水平并调节 ATM、RAD51、γ-H2AX 和剪切型 PARP 等标志物,从而有效诱导乳腺癌细胞凋亡 (apoptosis) 并抑制其增殖,且具有高度的靶向选择性,可用于三阴性乳腺癌的研究。

生物实验数据

生物活性 LL-K12-18 is a CDK12 kinase inhibitor and a dual-site molecular glue that inhibits human CDK12 with an IC50 of 283.9 nM and selectively degrades cyclin K via the ubiquitin-proteasome system by stabilizing the CDK12-DDB1 complex, while downregulating DNA damage response genes, reducing RNA polymerase II CTD Ser2 phosphorylation, and modulating markers such as ATM, RAD51, γ-H2AX, and cleaved PARP, thereby effectively inducing apoptosis and inhibiting the proliferation of breast cancer cells, and it exhibits high target selectivity and can be used for the study of triple-negative breast cancer.
IC50 & Target

RNA Polymerase

 

CDK12/Cyclin K

283.9 nM (IC50)

体外研究
(In Vitro)

LL-K12-18 抑制人乳腺癌细胞 MDA-MB-231 和 MDA-MB-468 的增殖,效力达亚纳摩尔级 (EC50=0.37 nM,MDA-MB-231; EC50=0.03 nM,MDA-MB-468)。
LL-K12-18 (0.2-500 nM; 0-6 h) 可通过 DDB1 介导的泛素-蛋白酶体系统依赖机制,在 MDA-MB-231 细胞中高效且快速地降解细胞周期蛋白 K,而对 CDK12 水平的影响极小 (DC50 0.38 nM)。
LL-K12-18 (25-2000 nM; 2-6 h) 可在 MDA-MB-231 细胞中选择性降解细胞周期蛋白 K (及其下游的 CDK13),并特异性抑制 CDK12 介导的 RNA 聚合酶 II CTD Ser2 残基的磷酸化。
LL-K12-18 (DDR 实验:50 nM;损伤/凋亡实验:25-2000 nM;孵育时长 6-24 h) 可在 MDA-MB-231 细胞中下调 DNA 损伤应答基因的表达,并诱导 DNA 损伤与细胞凋亡。

Western Blot Analysis

Cell Line: MDA-MB-231 human breast cancer cells
Concentration: 0.2-500 nM (DC50 determination); 50 nM (degradation kinetics); 125-2000 nM (cyclin K rescue assays with pre-treatment inhibitors); 20-100 nM (cyclin K rescue assays with DDB1 shRNA)
Incubation Time: 4 h (DC50 determination); 0-6 h (degradation kinetics); unspecified (cyclin K rescue assays)
Result: Degraded cyclin K with a DC50 of 0.38 nM, and almost completely degraded cyclin K at 10 nM within 4 h.
Nearly fully degraded cyclin K within 2 h at 50 nM, a faster rate than its precursor.
Induced cyclin K degradation that was rescued by pre-treatment with the proteasome inhibitor MG132, the NAE inhibitor MLN-4924, or knockdown of DDB1 via shRNA.
Had minimal effect on CDK12 protein levels at active concentrations.

Western Blot Analysis

Cell Line: MDA-MB-231 human breast cancer cells
Concentration: 25-2000 nM (cyclin/CDK selectivity assay); 2 μM (cyclin/CDK selectivity and RNA POL II phosphorylation assays)
Incubation Time: 2 h (proteomics analysis); 6 h (cyclin/CDK selectivity and RNA POL II phosphorylation assays)
Result: Significantly and selectively decreased cyclin K protein levels within 2 h; also reduced CDK13 levels, but had minimal impact on other tested proteins.
Reduced only cyclin K protein levels substantially among all tested cyclins (A2, D1, E1, H, T1) and CDKs (1, 2, 4, 6, 7, 9, 12) after 6 h treatment with up to 2000 nM.
Reduced phosphorylation of Ser2 on the RNA polymerase II CTD, but had a weak effect on Ser5 phosphorylation.

Real Time qPCR

Cell Line: MDA-MB-231 human breast cancer cells
Concentration: 50 nM (DDR gene expression assay); 25-2000 nM (DNA damage/apoptosis marker assay)
Incubation Time: 6 h (DDR gene expression assay); 24 h (DNA damage/apoptosis marker assay)
Result: Significantly reduced the mRNA levels of DDR genes (FANCI, FANCD2, RAD51, SMARCC2, ATM, ATR) in MDA-MB-231 cells, with greater inhibition than its precursor.
Reduced protein levels of ATM and RAD51, and increased levels of γ-H2AX (a DNA damage marker) and cleaved-PARP (an apoptosis marker) after 24 h treatment.
性状 固体
颜色 White to off-white

化学信息

分子量 559.49
分子式 C25H32Cl2N10O
CAS No. 3081311-94-3

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 25 mg/mL (44.68 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.7873 mL8.9367 mL17.8734 mL44.6836 mL
5 mM0.3575 mL1.7873 mL3.5747 mL8.9367 mL
10 mM0.1787 mL0.8937 mL1.7873 mL4.4684 mL
15 mM0.1192 mL0.5958 mL1.1916 mL2.9789 mL
20 mM0.0894 mL0.4468 mL0.8937 mL2.2342 mL
25 mM0.0715 mL0.3575 mL0.7149 mL1.7873 mL
30 mM0.0596 mL0.2979 mL0.5958 mL1.4895 mL
40 mM0.0447 mL0.2234 mL0.4468 mL1.1171 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础