SP-6-27 是一种结合于 β-微管蛋白秋水仙碱位点的微管蛋白 (tubulin) 解聚剂,可在卵巢癌细胞中诱导 G2/M 期细胞周期阻滞,并通过上调 Bax、Apaf-1、caspase-6、caspase-9 和 caspase-3 增强卵巢癌细胞的内在凋亡 (apoptosis),同时降低卵巢癌细胞的迁移能力、抑制人脐静脉内皮细胞的毛细血管管状结构形成,对正常卵巢上皮细胞表现出最低的细胞毒性,且与 Cisplatin (MS-E94993) 联合使用时在化疗敏感/耐药的卵巢癌细胞中表现出增强的细胞毒性,可用于卵巢癌研究。
产品编号: MS-A03416 CAS No.: 1384170-58-4 分子式: C24H24N4O 分子量: 384.48
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SP-6-27 是一种结合于 β-微管蛋白秋水仙碱位点的微管蛋白 (tubulin) 解聚剂,可在卵巢癌细胞中诱导 G2/M 期细胞周期阻滞,并通过上调 Bax、Apaf-1、caspase-6、caspase-9 和 caspase-3 增强卵巢癌细胞的内在凋亡 (apoptosis),同时降低卵巢癌细胞的迁移能力、抑制人脐静脉内皮细胞的毛细血管管状结构形成,对正常卵巢上皮细胞表现出最低的细胞毒性,且与 Cisplatin (MS-E94993) 联合使用时在化疗敏感/耐药的卵巢癌细胞中表现出增强的细胞毒性,可用于卵巢癌研究。

生物实验数据

生物活性 SP-6-27 is a tubulin depolymerizing agent that binds to the colchicine site of β-tubulin, induces G2/M phase cell cycle arrest in ovarian cancer cells, enhances intrinsic apoptosis in ovarian cancer cells by upregulating Bax, Apaf-1, caspase-6, caspase-9, and caspase-3, reduces the migration ability of ovarian cancer cells, inhibits capillary tube formation in human umbilical vein endothelial cells, exhibits minimal cytotoxicity toward normal ovarian epithelial cells, and shows enhanced cytotoxicity in chemosensitive/chemoresistant ovarian cancer cells when combined with Cisplatin (MS-E94993), making it useful for ovarian cancer research.
IC50 & Target

Bax

 

Caspase 3

 

Caspase-6

 

Caspase-9

 

体外研究
(In Vitro)

SP-6-27 (0.001-10 μM; 72 h) 在顺铂敏感和耐药的卵巢癌细胞中强力抑制增殖,并对正常 HOSEpiC 细胞表现出最低的细胞毒性 (OVCA 细胞的 IC50 为 0.10-0.84 μM,HOSEpiC 细胞为 83.35 μM)。
SP-6-27 (0.5 μM; 24 h) 扰乱 α-微管蛋白和 β-微管蛋白细胞骨架结构,降低卵巢癌细胞中的微管密度。
SP-6-27 (0.5 μM; 48 h) 降低卵巢癌细胞 (A2780) 的迁移能力。
SP-6-27 (0.5 μM; 24 h) 诱导顺铂敏感和耐药卵巢癌细胞的 G2-M 期细胞周期阻滞。
SP-6-27 (0.5 μM; 24-48 h) 诱导顺铂敏感和耐药卵巢癌细胞凋亡.
SP-6-27 在卵巢癌细胞中上调促凋亡基因 (Bax、PAF-1、caspase-9、caspase-6、Caspase-3) 和 GADD45A。
SP-6-27 (0.5 μM; 24-48 h) 在与顺铂同时处理时增强顺铂敏感细胞的细胞毒性,并在顺铂耐药细胞中于顺铂处理后顺序处理时增强细胞毒性。
SP-6-27 (0.5-1 μM; 24 h) 抑制人脐静脉内皮细胞的毛细血管管状形成,即使在肿瘤条件培养基存在的情况下。

Cell Viability Assay

Cell Line: cisplatin-sensitive OVCA (A2780, SKOV-3, TOV-112D), cisplatin-resistant OVCA (OVCAR-3, cis-A2780, cis-TOV-112D), HOSEpiC
Concentration: 0.001-10 μM
Incubation Time: 72 h
Result: Exhibited potent cytotoxicity against Cisplatin-sensitive OVCA cells with a mean IC50 of 0.14 μM and against cisplatin-resistant OVCA cells with a mean IC50 of 0.36 μM; showed minimal cytotoxicity with an IC50 of 83.35 μM in normal HOSEpiC cells.

Cell Migration Assay

Cell Line: A2780 OVCA cells
Concentration: 0.5 μM
Incubation Time: 48 h
Result: Reduced migration compared to control cells when monitored over 48 h.

Cell Cycle Analysis

Cell Line: Cisplatin-sensitive A2780 and Cisplatin-resistant cis-A2780 OVCA cells
Concentration: 0.5 μM
Incubation Time: 24 h
Result: Caused a complete collapse of cells in G1 phase and a substantial increase in G2-M phase cells: 87.8% of A2780 cells were arrested in G2-M phase (vs. 16.40% in control) and 58.9% of cis-A2780 cells were arrested in G2-M phase (vs. 14.5% in control).

Apoptosis Analysis

Cell Line: Cisplatin-sensitive A2780 and Cisplatin-resistant cis-A2780 OVCA cells
Concentration: 0.5 μM
Incubation Time: 24 h (caspase-3 microscopy); 24, 48 h (Annexin V/7-AAD)
Result: Caused a pronounced increase in Annexin-V positive cells (early/late apoptotic) in both cell types at 24 and 48 h; showed increased cleaved caspase-3 activity in A2780 cells compared to control cells.

化学信息

分子量 384.48
分子式 C24H24N4O
CAS No. 1384170-58-4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础